{"product_id":"sonax-profiline-ceramiccoating-cc-pro-paint-keramikversiegelung","title":"PROFILINE CeramicCoating \"CC\" Pro (Paint) Ceramic Coating","description":"\u003c!-- BLOCK 1: body_html --\u003e\n\u003ch2\u003eProfessional ceramic coating for up to 4 years of paint protection — SONAX PROFILINE CeramicCoating CC Pro\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does SONAX PROFILINE CeramicCoating CC Pro do? The single-stage professional ceramic coating for paints protects for up to 4 years against UV radiation, chemicals, and weather — with extreme hydrophobicity, gloss enhancement, and hardness in a single application.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eFor those in professional detailing seeking a durable protective solution that works in a single application and still delivers the performance of a true ceramic coating, the \u003cstrong\u003eSONAX PROFILINE CeramicCoating CC Pro\u003c\/strong\u003e is exactly the right product. This single-stage ceramic coating for paints forms a glass-like SiO₂-based protective layer on the paint surface, which protects for up to 4 years against UV radiation, acid rain, industrial fallout, chemicals, and mechanical impacts. At the same time, the ceramic layer noticeably improves the paint's gloss and color depth — an optical effect that visibly surpasses the vehicle's initial condition and is immediately perceptible to customers. The 50 ml container, including 4 applicator pads, contains enough material for a complete mid-size vehicle when properly dosed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUp to 4 years of durable protection in a single application.\u003c\/strong\u003e The CC Pro is developed as a single-stage ceramic coating — one layer is sufficient to activate the full protective effect. Unlike two-stage systems, the promoter step is omitted, reducing the total working time for the coating project. A protective duration of up to 4 years is a strong statement for a single-stage ceramic coating — it requires that the paint is completely decontaminated, polished, and degreased before application so that the CC Pro adheres directly to the immaculate clear coat. With correct preparation and regular maintenance (pH-neutral washing, periodic ceramic refreshment), a lifespan of 3–4 years is realistic.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtreme hydrophobicity and self-cleaning effect after curing.\u003c\/strong\u003e SiO₂ ceramic coatings create a superhydrophobic surface where water beads off in almost perfect spheres, carrying dirt particles with it. This lotus effect is particularly pronounced with the CC Pro due to the high SiO₂ concentration in the formulation: water does not stick to the surface but rolls off. In practice, this means fewer water spots after washing, easier drying, and reduced dirt adhesion in everyday use. The vehicle remains visually cleaner between washes after ceramic coating than without coating.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncreased surface hardness as protection against micro-scratches and chemical attacks.\u003c\/strong\u003e The cured ceramic layer of the CC Pro achieves a hardness significantly greater than that of clear coat — typically 9H and more when measured on the pencil hardness scale. This hardness protects the paint surface from micro-scratches caused by daily influences such as wiper operation, car washes, or dusting. Chemical resistance against acid rain, insect residues, bird droppings, and industrial fallout is also significantly improved compared to an uncoated paint — aggressive substances can attack the ceramic layer, but they cannot penetrate the clear coat as quickly as with an unprotected vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e The CC Pro leaves no room for error in surface preparation — those who enclose holograms, scratches, or contamination under the ceramic layer will preserve them for years. The complete preparation protocol is: decontamination (iron remover, tar remover), wet sanding or polishing step for scratch removal, followed by finish polishing (e.g., \u003ca href=\"\/en\/products\/sonax-profiline-perfectfinish-finish-politur\"\u003eSONAX PROFILINE PerfectFinish\u003c\/a\u003e) for a mirror-smooth surface, then IPA wipe-down for degreasing. Only then apply CC Pro in thin, even strokes — avoid dripping on edges. When applying, choose areas no larger than 50x50 cm, observe the dwell time (manufacturer's specification), then remove with a clean microfiber cloth before the product dries. For the care of the finished ceramic layer, we recommend \u003ca href=\"\/en\/products\/sonax-profiline-ceramic-spraycoating-spruehversiegelung-keramik\"\u003eSONAX PROFILINE Ceramic SprayCoating\u003c\/a\u003e as a periodic topper after each wash — this reactivates hydrophobicity and significantly extends the lifespan of the CC Pro.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSiO₂ ceramic chemistry explained — how CC Pro builds paint protection at a molecular level\u003c\/h3\u003e\n\u003cp\u003eCeramic coatings like the \u003cstrong\u003eSONAX PROFILINE CeramicCoating CC Pro\u003c\/strong\u003e work fundamentally differently from waxes or polymer sealants. Waxes and polymers lie as a film on the paint surface, adhere through physical adsorption, and are degraded by washes, UV light, and mechanical impacts over weeks to months. Ceramic coatings, on the other hand, react chemically with the paint surface — the SiO₂ compounds in the CC Pro condense on the clear coat to form a covalently bonded glass layer that cannot be degraded by simple washing or UV exposure. Only mechanical abrasion (polishing) or chemical attacks with very low or very high pH values affect the fully cured layer.\u003c\/p\u003e\n\u003cp\u003eThe curing process begins immediately after the application of the CC Pro and takes 24–72 hours for initial curing, depending on ambient temperature and humidity. The full final hardness of the ceramic layer is reached after approx. 7–14 days — during this time, the vehicle should ideally not be exposed to intense weather conditions or aggressive chemical influences. Ideally, the coated vehicle should be parked indoors or under cover for the first few days. Washes during the first 7 days should be gentle (only hand-rinsed hand wash, no high pressure directly on the surface) so that the curing is not disturbed.\u003c\/p\u003e\n\u003cp\u003eThe SiO₂ concentration in the CC Pro is optimized for a single-stage system: too low a concentration would reduce protective performance and durability; too high a concentration would make application more difficult and risk streaking or deviations in high gloss. SONAX has balanced this in the CC Pro to match the application profile of experienced detailers — a product that is performance-oriented in its formulation but delivers reproducible results when properly applied. The optimized removal time after application allows for smooth work even on larger vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eApplying CC Pro correctly — the complete workflow from preparation to curing\u003c\/h3\u003e\n\u003cp\u003eThe application workflow of the \u003cstrong\u003eSONAX PROFILINE CeramicCoating CC Pro\u003c\/strong\u003e can be divided into three phases: preparation, application, and curing. The preparation phase is crucial for the long-term result: first, complete decontamination of the paint — loosen iron particles with iron remover, treat tar spots with tar remover, remove limescale residues. Then polishing: for normal used conditions, \u003ca href=\"\/en\/products\/sonax-profiline-perfectfinish-finish-politur\"\u003eSONAX PROFILINE PerfectFinish\u003c\/a\u003e is sufficient as a finishing polish; for more heavily scratched paints, first precede with a compounding step using FS 05-04 or CutMax. After polishing: IPA wipe-down (isopropyl alcohol 1:1 with water) over all surfaces to completely remove oils, polish residues, and greases. The paint surface must be absolutely oil-free and clean when applying the CC Pro.\u003c\/p\u003e\n\u003cp\u003eApplication: moisten the included applicator pad with 2–3 drops of CC Pro — no more. Ceramic coatings are concentrated, and less is more: a thin, even film adheres better than an excessively thick layer and is easier to remove. Apply panel by panel in cross-hatch strokes (horizontal + vertical), with overlapping passes of approx. 3–4 cm. Mask off edges and trim with tape or remove immediately with a stick after application — ceramic residues on edges and in crevices harden severely and require aggressive rework. Observe the dwell time and change the cloth when it becomes difficult to maneuver.\u003c\/p\u003e\n\u003cp\u003eCuring and aftercare: Protect the vehicle from rain and moisture for at least 24 hours; first wash no earlier than 48–72 hours; full mechanical load capacity after 7 days. No wax, no silicone spray, no pH-acidic or alkaline cleaners during the first 14 days. After that, the vehicle is cleared for normal pH-neutral washes — the long-term care cycle consists of regular hand washes with pH-neutral shampoo and periodic refreshment with a ceramic-compatible topper spray.\u003c\/p\u003e\n\n\u003ch3\u003eApplication areas of CC Pro — which vehicles and customers benefit from a ceramic coating\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eCC Pro\u003c\/strong\u003e is suitable for all vehicles where multi-year protection with minimal ongoing maintenance is desired. A ceramic coating provides particularly high benefits for new vehicles — here, the paint is protected from day one, before scratches, oxidation, and contamination can occur. For customers who view their vehicle as an investment or want to keep it in immaculate condition, ceramic coating is by far the most economical long-term solution: one application every 4 years replaces numerous annual polymer sealing treatments.\u003c\/p\u003e\n\u003cp\u003eFor workshops and detailing studios, the CC Pro is an attractive premium service: the added value for the customer is directly perceptible (gloss, hydrophobicity, protection promise), the margin per order is good, and the product delivers reproducible results with consistent preparation. The 50 ml unit size with 4 pads is designed for one vehicle and allows for clean project cost calculation: one container = one vehicle. In operation, the CC Pro should be stored in a cool and dry place; after opening, any remaining quantities should be kept in the sealed original container to prevent moisture ingress, which pre-activates the ceramic chemistry.\u003c\/p\u003e\n\u003cp\u003eFor leased and company vehicles, the CC Pro is particularly interesting: the paint remains in better condition over the entire leasing period (typically 2–4 years) — fewer scratches, less oxidation, easier washing — which leads to fewer reclaims from the lessor when the vehicle is returned. A one-time protection upon vehicle handover thus quickly pays for itself when factoring in the cost of professional paint detailing at the end of the lease.\u003c\/p\u003e\n\n\u003ch3\u003eCC Pro vs. CC One vs. CC Evo — Ceramic Coating Comparison in the SONAX PROFILINE Range\u003c\/h3\u003e\n\u003cp\u003eThe SONAX PROFILINE CeramicCoating range offers the right solution for various requirements. The \u003ca href=\"\/en\/products\/sonax-profiline-ceramiccoating-cc-one-paint-keramikversiegelung\"\u003eSONAX PROFILINE CeramicCoating CC One\u003c\/a\u003e is the entry-level ceramic coating in the range: with 40 ml and 2 applicator pads, it is more affordable and easier to use, with shorter protective performance (approx. 12–24 months) — ideal for users who want to gain initial experience with ceramic coatings or coat vehicles with shorter ownership periods. The \u003cstrong\u003eSONAX PROFILINE CeramicCoating CC Pro\u003c\/strong\u003e is an upgrade in protective performance (up to 4 years) and SiO₂ concentration — a product for experienced users with higher demands for long-term protection and optical results.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-profiline-ceramiccoating-cc-evo-zwei-stufen-keramikversiegelung\"\u003eSONAX PROFILINE CeramicCoating CC Evo\u003c\/a\u003e is finally the flagship system in the SONAX PROFILINE ceramic range: a two-stage system (promoter + main coating) for maximum adhesion and maximum protective duration, designed for cases where the best possible result is required — show cars, high-end vehicles, customers with the highest demands. The CC Evo requires more time and experience in application but delivers a result that goes beyond the CC Pro. For the majority of professional detailing jobs, the CC Pro is the economically and qualitatively optimal product — it bridges the gap between the accessibility of the CC One and the performance of the CC Evo.\u003c\/p\u003e\n\n\u003ch3\u003eBuy SONAX PROFILINE CeramicCoating CC Pro — Contents, Target Group, and Recommendation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE CeramicCoating CC Pro\u003c\/strong\u003e is available as a complete set with 50 ml of ceramic coating and 4 applicator pads. The set is designed for one vehicle — for cars up to mid-size, the content is comfortably sufficient for all exterior surfaces (roof, hood, fenders, doors, rear, bumpers). For larger vehicles (SUV, van, transporter), we recommend keeping the dosage very economical or having a second set available. The included 4 applicator pads are designed for different surfaces and should be changed regularly — a saturated pad distributes the CC Pro unevenly.\u003c\/p\u003e\n\u003cp\u003eTarget group for the CC Pro: Professional detailers with experience in ceramic coating; workshops that offer ceramic coating as a premium service; car dealers who want to deliver new vehicles with long-term protection; and ambitious home users with experience in vehicle care and the necessary tools for preparation (polisher, IPA, microfiber towels). Without correct preparation, the CC Pro should not be used — the product requires a flawless, degreased paint surface.\u003c\/p\u003e\n\u003cp\u003eConclusion: Those who want to coat a vehicle with durable, professional ceramic protection and take preparation seriously will find the SONAX PROFILINE CeramicCoating CC Pro to be a powerful, proven product with excellent value for money in the premium segment. Four years of paint protection from a single application — that is the promise of the CC Pro, which is fulfilled with proper application.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"50 ml + 4 applicator pads","offer_id":55547538932047,"sku":"D1-SNX-2628410","price":79.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-ceramiccoating-cc-pro-paint-keramikversiegelung_50ml.png?v=1752511310","url":"https:\/\/detailing1.nl\/en\/products\/sonax-profiline-ceramiccoating-cc-pro-paint-keramikversiegelung","provider":"Detailing1","version":"1.0","type":"link"}