{"product_id":"sonax-profiline-coatingapplicator-applikationspads","title":"PROFILINE CoatingApplicator Application Pads (Evolon®)","description":"\u003ch2\u003eApply ceramic coatings evenly and without micro-scratches with the SONAX CoatingApplicator\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat makes the SONAX CoatingApplicator special? Application pad with Evolon® fleece surface and internal foam layer — applies ceramic coatings evenly, without micro-scratches, and sparingly, without streaks or product loss.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eWhen applying a ceramic coating, you invest not only in the coating itself but also in the preparation — polishing, degreasing, controlled environmental conditions. It is all the more frustrating when the result fails due to a cheap application pad: uneven layer thickness, micro-scratches in the freshly polished paint, product waste due to uncontrolled dispensing. The \u003cstrong\u003eSONAX CoatingApplicator\u003c\/strong\u003e solves exactly this problem. With its Evolon® fleece surface made of extremely fine polyamide and polyester fibers, it applies all SONAX CeramicCoatings evenly and without micro-scratches — from paint sealants and film sealants to plastic coatings. The internal foam layer stores the coating and dispenses it in a controlled manner, so you can coat an entire body section with just a few drops.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicro-scratch-free Evolon® surface.\u003c\/strong\u003e The Evolon® fleece consists of fibers that are finer than a human hair — about ten times finer than conventional microfiber. This extremely smooth surface structure prevents micro-scratches even on delicate clear coats and freshly polished surfaces. This is crucial when applying a coating: Any scratch that occurs during application will be trapped under the ceramic layer and cannot be corrected afterward.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eControlled product dispensing through a foam core.\u003c\/strong\u003e The internal foam layer acts as a reservoir — it absorbs the liquid coating and dispenses it evenly over the entire working surface. No dripping, no gushing effect, no dry spots at the edge of the pad. This even dispensing is why professional detailers do not work with just any foam pads but with dedicated coating applicators: The coating's layer thickness largely determines its durability and appearance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact format for precise work.\u003c\/strong\u003e At 85 × 60 mm, the CoatingApplicator sits securely in the hand and reaches even tight spots — grooves, edges, transitions between body parts. Especially when sealing plastic trim, headlights, or window frames, a compact pad is better suited than large-area applicators, which lie unevenly on edges and corners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Always apply the coating to the light Evolon® side of the pad — not to the dark foam side. Apply two to three drops to the pad, spread them with a light stroke on a clean surface, and then work in a cross-hatch pattern: first horizontally, then vertically. This ensures an even layer thickness without directional streaks. Change the pad after every two to three body parts at the latest — a saturated pad dispenses too much product and creates streaks.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eEvolon® fleece — why the material makes a difference in coating application\u003c\/h3\u003e\n\n\u003cp\u003eEvolon® is a brand name of the Freudenberg Group for a special spunbond nonwoven fabric made of continuous filaments. Unlike conventional microfiber, which is woven or knitted, Evolon® fibers are created by splitting a bicomponent filament — the result is fibers with a diameter of less than one micrometer, which are significantly finer and more uniform than woven microfiber. For coating application, this has two practical consequences: First, the pad glides almost frictionlessly over the surface and does not cause micro-scratches, not even on soft Japanese clear coats or freshly polished surfaces. Second, the fleece absorbs the coating capillarily and dispenses it in a controlled manner — similar to how a high-quality brush picks up paint without dripping.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eCoatingApplicator\u003c\/strong\u003e combines this Evolon® fleece with an internal foam layer that serves as an additional product reservoir. In practice, this means: You apply a few drops of coating to the pad, and the foam layer distributes the product evenly over the entire contact surface. Without this foam core, the coating would remain concentrated at the application point and spread unevenly thinly when wiped — a typical problem with simple foam applicators without a fleece layer.\u003c\/p\u003e\n\n\u003cp\u003eA common misconception: Some users believe that a soft microfiber cloth can serve the same purpose as a dedicated coating applicator. This works for spray sealants that are spread over a large area and wiped off. However, for real ceramic coatings — i.e., SiO₂- or Si-carbon-based products that chemically cross-link on the surface — the uniform layer thickness is crucial for the result. A microfiber cloth has an irregular surface with long fiber loops that absorb the coating uncontrollably and apply it too thickly or too thinly in places. The Evolon® pad with its flat, uniform surface is the technically superior solution for this specific task.\u003c\/p\u003e\n\n\u003ch3\u003eCoating application step by step — how to get the most out of the pad\u003c\/h3\u003e\n\n\u003cp\u003ePreparation does not begin with the pad, but with the surface: Before you pick up the \u003cstrong\u003eSONAX CoatingApplicator\u003c\/strong\u003e, the paint or film must be washed, polished if necessary, and degreased with \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-prepare-reiniger-kontrollspray-entfetter\"\u003eSONAX PROFILINE Prepare\u003c\/a\u003e. Any grease film, any polishing residue under the coating impairs adhesion and shortens durability. Prepare removes these residues residue-free and also serves as a control spray — under the control spray, the last defects become visible that should be corrected before sealing.\u003c\/p\u003e\n\n\u003cp\u003eTake a fresh pad out of the packaging and hold it with the light Evolon® side facing up. Apply two to three drops of the coating to the center of the fleece surface — for SONAX CeramicCoatings, this amount is sufficient for an area of about 40 × 40 centimeters. First, spread the product with light strokes on the surface to evenly wet the pad, and then apply it in a cross-hatch pattern: first horizontally, then vertically. This technique ensures that the coating is distributed gap-free and in an even thickness.\u003c\/p\u003e\n\n\u003cp\u003eWork in small sections — half a body panel per pass is a good guideline. After application, wipe off excess coating with a clean Coating Towel before it dries. On paint, wiping should be done within one to two minutes, on film sooner. If you notice that the pad is dispensing less evenly or the resistance during spreading increases, change the pad. A saturated or dried-out pad creates streaks and distributes the product unevenly.\u003c\/p\u003e\n\n\u003cp\u003eEnvironmental conditions play an important role in application. Ideal temperatures are between 15 and 25 degrees Celsius with a relative humidity of 40 to 60 percent. At too low temperatures, the cross-linking of the coating slows down; at too high temperatures, it dries too quickly on the pad — both impair the result. If possible, work in a closed garage or workshop, not in direct sunlight. Drafts are also problematic: They accelerate drying and can transport dust particles to the freshly coated surface, which are then trapped under the ceramic layer.\u003c\/p\u003e\n\n\u003cp\u003eA professional trick for particularly even results: Use an LED inspection light during application. Under directed light, unevenly coated areas become immediately visible — as dull spots on the otherwise uniformly glossy layer. This way, you can correct problem areas before the coating hardens and correction becomes impossible.\u003c\/p\u003e\n\n\u003cp\u003eImportant: The \u003cstrong\u003eCoatingApplicator pads\u003c\/strong\u003e are disposable products. After use, the coating hardens in the pad, and the Evolon® fibers lose their uniform structure. Reusing a used pad would cause exactly the micro-scratches that the new pad prevents. The six pads in the set are sufficient for a complete vehicle sealant — for a partial sealant, pads remain for the next application.\u003c\/p\u003e\n\n\u003ch3\u003eFor which coatings is the applicator suitable — application area and limitations\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX CoatingApplicator\u003c\/strong\u003e is designed for all SONAX CeramicCoatings and works with the entire range: \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-ceramiccoating-cc-one-paint-keramikversiegelung\"\u003eCC One for paint\u003c\/a\u003e, CC Evo for two-stage sealing, CC Pro for professional application, \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-ceramiccoating-cc-vinyl-ppf-folienversiegelung\"\u003eCC Vinyl+PPF for films\u003c\/a\u003e, \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-ceramiccoating-cc-plastic-rubber-kunststoffversiegelung\"\u003eCC Plastic+Rubber for plastic\u003c\/a\u003e and CC HeadlightCoating for headlights. The Evolon® surface is compatible with all substrates — clear coat, film, hard plastic, polycarbonate.\u003c\/p\u003e\n\n\u003cp\u003eWhere the pad reaches its limits: The CoatingApplicator is not the right choice for spray sealants or wax products. Spray sealants are applied over a large area and wiped off — a microfiber cloth is more efficient for this. Wax products have a significantly thicker consistency than ceramic coatings and would overload the foam core, so that controlled dispensing no longer works. The CoatingApplicator is a specialist: optimized for thin-liquid, fast-curing ceramic coatings, where precision and uniformity are paramount.\u003c\/p\u003e\n\n\u003cp\u003eGlass sealants can also be applied with the pad, but many detailers prefer an even more compact applicator or a folded suede cloth for glass to better control the higher pressure on the hard glass surface. However, on paint, film, and plastic — the three main application areas — the CoatingApplicator is the first choice in the SONAX system.\u003c\/p\u003e\n\n\u003cp\u003eMatte films and matte paints are a special case: Here, the strength of the Evolon® material becomes particularly clear. Matte surfaces are extremely sensitive to scratches and friction — any damage to the matte microstructure creates an unwanted glossy spot that can no longer be polished. The ultra-fine Evolon® fleece glides over matte surfaces without changing the structure, and the coating is applied thinly enough to completely preserve the matte character. Anyone who wants to seal a matte film or matte paint should never work with a conventional foam pad — the risk of visible application marks is too high.\u003c\/p\u003e\n\n\u003ch3\u003eCoating Applicator Comparison — Evolon® vs. Suede vs. Foam\u003c\/h3\u003e\n\n\u003cp\u003eThere are three main types of coating applicators on the market: Evolon®-based pads, suede pads (imitation suede), and simple foam applicators.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuede pads\u003c\/strong\u003e are the classic choice of many detailers and are often supplied with coatings from other manufacturers. They have a velvety, smooth surface that distributes coatings well. The disadvantage: Suede material absorbs the coating strongly and dispenses it less controllably — you need more product per area. With expensive coatings, this increased consumption adds up noticeably. In addition, suede pads can leave fine streaks on soft paints with high pressure, which only become visible after curing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSimple foam applicators\u003c\/strong\u003e without a fleece layer are the cheapest option. They work for spray sealants and thick waxes, but are not ideal for ceramic coatings: The open-pored foam structure dispenses the thin-liquid coating uncontrollably — sometimes too much, sometimes too little. The result is areas with double layer thickness next to areas that are hardly coated. On matte films or delicate surfaces, the coarse foam structure can also leave visible patterns. In professional detailing businesses, simple foam applicators are therefore almost never seen for coating application — they are only used there for polishing work or applying waxes, where the requirements for uniformity are significantly lower.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eEvolon® pads\u003c\/strong\u003e combine the advantages of both worlds: The ultra-fine fleece surface glides streak-free like a good suede pad, while the internal foam core dispenses the coating in a controlled and economical manner. The lower product consumption relativizes the higher unit price — per sealed vehicle, you can expect two to four fewer pads than with conventional suede applicators because you need to refill less product and change less often. Over a year, this means measurable savings in coating consumption for a detailing business that seals three to four vehicles weekly — and this with a better end result. The price per pad therefore quickly relativizes itself when considering the total cost of the sealant and not just the individual price of the applicator.\u003c\/p\u003e\n\n\u003ch3\u003eBuy CoatingApplicator — Set Contents and Recommendation\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX CoatingApplicator\u003c\/strong\u003e set contains six application pads measuring 85 × 60 mm — sufficient for a complete vehicle sealant, including spares. For businesses that seal daily, a supply of two to three sets is recommended to avoid having to reorder in the middle of a vehicle detailing job. The pads are individually wrapped in foil and thus remain clean and contamination-free until use.\u003c\/p\u003e\n\n\u003cp\u003eFor the optimal results chain, combine the CoatingApplicator with the appropriate SONAX CeramicCoating of your choice and a SONAX Coating Towel for removal. The Coating Towels are specially designed for ceramic sealing: extremely short-pile so that no fibers are trapped in the coating, and soft enough not to damage the freshly applied layer during wiping. This interplay of applicator, coating, and removal towel is the system that SONAX has designed for professional use — and which also delivers the best results for private users in practice.\u003c\/p\u003e\n\n\u003cp\u003eFor \u003cstrong\u003eprofessional use\u003c\/strong\u003e, it is always worthwhile to have at least one set in reserve. In the workflow of vehicle detailing, nothing is more annoying than running out of the last pad and having to interrupt the sealing process. Professionals also often work with a rotation system: While one pad is working on one section, a fresh pad is ready to seamlessly start the next section. This keeps the workflow constant, and the coating's open time — i.e., the time before it dries — is optimally utilized.\u003c\/p\u003e\n\n\u003cp\u003eA final note on storage: Store unused pads dry and dust-free in their original packaging. Contaminated pads — for example, due to dust, polishing residues, or fingerprints on the fleece side — can cause micro-scratches and should no longer be used for coating application. When in doubt, it is better to use a new pad: For a ceramic sealant that is supposed to last twelve to eighteen months, the pad is the cheapest element in the entire workflow — and at the same time the element that determines the quality of the result. Anyone who spends hours polishing and degreasing during preparation should not skimp on the applicator in the last step.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"6 pieces \/ 85 x 60 mm","offer_id":53519908405583,"sku":"D1-SNX-2377410","price":14.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-coatingapplicator-applikationspads_6-stueck.png?v=1730645209","url":"https:\/\/detailing1.nl\/en\/products\/sonax-profiline-coatingapplicator-applikationspads","provider":"Detailing1","version":"1.0","type":"link"}