SONAX PROFILINE Glass Detailer Concentrate Glass Cleaner Concentrate 5000ml

Clean glass streak-free and let your clay bar glide safely with the SONAX PROFILINE Glass Detailer Concentrate

What makes the SONAX PROFILINE Glass Detailer Concentrate special? This ammonia-free glass cleaner concentrate cleans all vehicle glass and mirror surfaces streak-free, doubles as a clay lube, and dilutes up to 1:20 — easy on the budget for a professional operation.

If you detail cars day in, day out, you know the problem: supermarket glass cleaners leave streaks, flash off too fast, or just won't work as a clay lube. Pro glass work needs a concentrate that ticks several boxes at once. The SONAX PROFILINE Glass Detailer Concentrate is ammonia-free, leaves no streaks on vehicle glass, mirrors or windscreens — and at a 1:4 dilution it doubles as clay lube for working the clay bar across paint and glass. Two jobs, one concentrate, up to four working strengths.

• Ammonia-free — safe on tinted glass and coatings. Plenty of standard glass cleaners use ammonia as the solvent. Ammonia attacks tint film on side windows, can soften hydrophobic coatings and leaves unwanted residue on mirror surfaces. The Glass Detailer Concentrate skips ammonia entirely — so it's safe to use on all common vehicle glass, coated panes and side mirrors.
• Two jobs in one: glass cleaner and clay lube. Mixed 1:4, the Glass Detailer Concentrate makes an effective clay lube. Clay lube protects the paint from micro-scratches while you clay and lets the clay bar glide evenly across the surface. One concentrate for both jobs saves space on the cart and cuts costs compared to buying two specialist products.
• Dilutes up to 1:20 — goes a long way in the shop. Depending on how dirty the glass is and where you're using it, you can dial the concentrate to different strengths. At 1:10 to 1:20 the Glass Detailer Concentrate handles daily routine cleaning of lightly soiled glass. That makes it seriously economical: one litre of concentrate gives you up to 20 litres of ready-to-use glass cleaner.

Detailing1's tip from the shop: For cleaning the inside of windscreens, bump the strength up to 1:6 — interior glass has to cut fingerprints, grease and tobacco film, which are tougher to shift than outside grime. Lay the diluted Glass Detailer down with a clean microfibre cloth, work in circles and buff off with a second, dry cloth. Don't spray straight onto hot glass in direct sun — it flashes off too fast and leaves streaks.

Ammonia-free glass cleaner concentrate — formulation and how it works in detail

The Glass Detailer Concentrate runs on a surfactant-solvent system with no ammonia. Surfactants drop the surface tension of the water so grease, finger marks and wiper haze lift evenly off the glass and get picked up by the cloth weave. The solvent blend in the concentrate also drives a fast, residue-free dry-off — the glass film flashes off before fresh streaks can form.

Ammonia shows up in a lot of household glass cleaners as a fast-evaporating solvent that reliably cuts grease and oils. The catch: ammonia attacks film and paint edges, can soften the adhesive layer of tint film and leaves a tell-tale residue on coated surfaces. In a professional detailing operation, where tinted glass and coated panes are everyday work, an ammonia-free glass cleaner isn't a nice-to-have — it's a safety requirement.

The dilution flexibility is another core feature: dilute the Glass Detailer Concentrate to 1:4 and you get a high-strength cleaner for heavily soiled glass with baked-on grime, wiper marks and antifreeze residue. At 1:10 to 1:20 you get a solution for quick routine cleaning after a wash or between detailing steps. That scalability is a real edge in day-to-day shop work over ready-mixed cleaners with one fixed strength.

An easily missed upside of the ammonia-free formula: the Glass Detailer Concentrate is odour-neutral. Conventional ammonia-based glass cleaners leave that sharp, distinctive smell in the cabin — it lingers and can leave a bad impression with the customer. An ammonia-free product sidesteps that completely — a detail that matters in professional customer work.

Once you've diluted it in a spray bottle — say with the SONAX PROFILINE Sprayboy or a PROFILINE DruckpumpZerstäuber — the Glass Detailer is ready to go. The concentrate is clear and colourless and mixes with plain tap water. For hard water, dilute it with distilled water so you don't leave lime residue on the glass.

Using Glass Detailer Concentrate right — glass cleaning and clay lube in the workflow

For glass cleaning the order is simple: outside first, then inside. On the outer glass, always start at the coolest part of the car and work fast in sunlight, because the cleaner flashes off quickly in direct sun and leaves streaks. Two or three sprays per pane is plenty for normal routine cleaning. Wipe off with a clean, lint-free washable microfibre cloth and buff with a second, dry cloth.

As a clay lube at 1:4, the Glass Detailer Concentrate really earns its place: spray the area down generously and run the clay bar evenly across it. The lube stops the clay dragging dry over paint or glass — claying dry would leave micro-scratches and is counterproductive. The 1:4 dilution of the Glass Detailer gives you exactly the right slip without the excess foam that gets in the way while you clay.

For the GlassCleaner concentrate — also offered in the PROFILINE range — the split is clear: the GlassCleaner comes in bulk containers (10 L, 25 L, 200 L) for shops with very high glass-cleaning demand. The Glass Detailer Concentrate in 1-litre and 5-litre containers is the flexible all-rounder for a normal detailing operation that has to cover both glass cleaning and clay work.

For convertible drivers and owners of cars with a lot of glass — panoramic roof, all-round-vision design — the Glass Detailer Concentrate is a particularly economical choice. Big glass areas need more cleaning volume; with a concentrate you mix up exactly what you need without wasting an expensive ready-mixed cleaner. Keep some made up in a 500 ml spray bottle and you can quickly freshen the glass after every contact with the car, without reaching for the full cleaning kit.

Interior cleaning makes different demands: fingerprints, grease marks from the sunroof frame and tobacco film are more stubborn than outside grime. Here a stronger mix (1:6 or 1:4) plus a two-step approach works best: clean first, then go back over with distilled water to pull off any surfactant residue. A streak-free interior result is easy to reproduce on that basis.

Glass Detailer in the detailing workflow — use cases and limits

There are several points in a detailing job where the Glass Detailer Concentrate fits. Before paint correction: after the initial wash and before claying, you use it as clay lube. During interior cleaning: as a glass cleaner for the windscreen, side windows, interior mirror and sunroof glass. After sealing: for a final glass freshen-up that makes sure no sealant runs are left on the glass.

In the winter months especially, the glass cleaner takes on extra importance. Antifreeze washer fluid leaves an oily film on glass and wiper rubber that water alone won't shift. The Glass Detailer Concentrate cuts through that film effectively without attacking the wiper rubber. The result: clear glass and wipers that wipe clean again.

The Glass Detailer Concentrate also works for glass cleaning on cars being prepped for a ceramic coating. Before applying a windscreen coating, the glass has to be absolutely grease- and residue-free. One pass with the Glass Detailer at a stronger strength, followed by an isopropanol wipe-down, sets up the ideal base — the Glass Detailer pulls off the organic residue, the IPA the last traces of solvent. That two-step is standard in professional coating shops.

On polycarbonate plastic glazing — as found on older convertibles, motorcycles and certain special vehicles — use the Glass Detailer with care. Plastic glazing is more sensitive to solvents than mineral glass. A test on a less visible spot confirms it's compatible before you do the whole pane.

The Glass Detailer Concentrate runs out of road on heavy soiling like bug splatter, dried bird droppings and tree sap. For that kind of extreme grime you need a pre-treatment with a dedicated cleaner first; the Glass Detailer then handles the final cleaning step for a streak-free finish.

A practical workflow for prepping glass before sealing: first, mechanical cleaning of the outer pane with the FilzPad and glass polish to remove baked-on spots and wiper marks. Then a full clean with the Glass Detailer Concentrate at 1:4. Finally an IPA wipe as the last degrease before laying down the glass sealant. In this workflow the Glass Detailer is the bridge product between mechanical polishing and chemical prep — and lays the base for a glass sealant that reaches its full service life.

Glass Detailer Concentrate compared — when each glass-cleaning product fits

The SONAX PROFILINE glass cleaner range has two concentrates with different jobs. The GlassCleaner is the bulk concentrate for high vehicle throughput — available in 10 L, 25 L and 200 L — and is aimed at car washes and large detailing operations. The Glass Detailer Concentrate in 1 L and 5 L is the flexible shop concentrate for mid-size operations and specialist jobs.

The deciding difference is the extra function: while the GlassCleaner is built purely as a glass cleaner, the Glass Detailer Concentrate also covers clay-lube duty thanks to its make-up. If you're detailing a car and have both glass cleaning and clay work planned, the Glass Detailer Concentrate gives you a single product for both jobs.

Compared with the SONAX PROFILINE Acryl+GlasReiniger — developed specifically for acrylic and plastic glazing as well as Plexiglas — the Glass Detailer Concentrate is aimed at mineral vehicle glass. Both products have their niche: for cars with plastic glazing the Acryl+GlasReiniger is the safer call; for standard vehicle glass the Glass Detailer Concentrate is the more economical and flexible tool.

Run both the GlassCleaner and the Glass Detailer Concentrate in the shop and you've got the right product for every situation: GlassCleaner for high-volume use in the car wash or fleet service, Glass Detailer Concentrate for the detailing workflow with clay work and specialist cleaning. The two products are matched to each other and complement rather than overlap.

Ready-to-use glass cleaner from the spray-bottle aisle — the retail stuff — can't be used as clay lube, costs more per litre than the concentrate and offers no dilution flexibility. For a professional operation that watches efficiency and cost, a concentrate like the Glass Detailer Concentrate is the better solution.

Buying Glass Detailer Concentrate — the right pack size for every need

Picking the right pack size comes down to how much you use and how you store it. The 1-litre container gives you — at a typical working dilution of 1:10 — 10 litres of ready-to-use glass cleaner. For a shop doing 5–10 cars a day, that lasts several working days. The 5-litre container cuts the cost per litre of ready solution noticeably and suits operations with higher throughput, or anyone using the concentrate heavily as a clay lube.

The 2×1-litre and 3×1-litre sets let you keep several containers in stock without the storage footprint of a big 5-litre container. If you're not sure how fast you'll get through the concentrate, start with the double set and watch your usage before stepping up to the bigger format.

As a companion to the Glass Detailer Concentrate, the professional spray bottles from the SONAX PROFILINE range are well worth it. The Sprayboy has an adjustable spray head you can switch between a fine mist for even coverage on glass and a focused jet for spot work. Fill different bottles for different dilutions — one for glass cleaning, one for clay lube — and you streamline the workflow a lot while avoiding constant re-mixing.

For detailers who offer customers a full interior cleaning service, the Glass Detailer Concentrate is the last link in a structured cleaning chain: seats and carpets with the IntensivReinigungsBürste and interior cleaner, leather with LeatherCleaner, plastics with all-purpose cleaner — and finally all the glass with the Glass Detailer for that first clear, streak-free view. That finish isn't just about looks, it's a safety point too: clean glass with no streak film measurably improves visibility on night drives and against the light.

The SONAX PROFILINE Glass Detailer Concentrate system is an economical, flexible foundation for glass cleaning in a professional detailing operation — from the prep phase through clay work to the final high-gloss clean of the glass after sealing. For shops building their range consistently on the SONAX PROFILINE system, this concentrate is the ideal way into an efficient, economical glass-cleaning system that grows with every further PROFILINE product and adapts to changing needs.